Philips MX3297B - Manual (Page 28)

U
sing the
A
udio
A^
ideo
I
nput
J
acks
AUX INPUTS
Z ' f h e TVs AudiolVideo Input
jacks are for direct picture and
sound connections between the TV
and a VCR (or Video Disc Player,
etc.) that has AudiolVideo Output
jacks.
To view the playback of a VCR
tape by using the AudiolVideo
Input jacks on the TV:
C begin !
Connect the VIDEO OUT jack
from the VCR to the VIDEO IN
jack on the TV.
<|> Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
VCR to the AUDIO IN jacks on
the TV.
Select the "VCR/AUX"
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) ^•►buttons.
Then press the MENU button.
Press the MENU AT and
MENU (M) buttons to highlight
and select (i^) the VCR/AUX
mode.
Turn the VCR ON and press
PLAY to view the tape on ¿le TV.
S mart H elp
Remember, after it is
^connected an easy way to
select the AUX mode is to press
the TV/VCR button on the
remote. Channels 3 and 4 can also
be selected in this way.
If you have added AUX to the
TV's channel memory (see page
12), just press the CHANNEL
AT buttons to select the AUX
mode.
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE BACK OF TV
If you have a single (monaural)
Audio Output VCR, "Y” connectors
are available to complete your
conneaion. Contact your dealer, or
our Parts Information Center (1-800-
292-6066) to order any optional
accessoties.
28