Philips MX3297B User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
ound
M
enü
C
ontrols
(
continued
)
□
SURROUND SOUND
T^y adding optional external
JLJ speakers to the TV*s sound
system, you can create the feeling
of reflected sound that surrounds
you at a movie theater or concert
hall,
[ BEGIN]
Connect both external
speakers to the speaker wire
terminals on the TV.
Recommended speakers: 8ohm, 15
watt minimum. Be sure the (+) and
(-) speaker wires are connected to
the correct R(ight) and L(eft)
speaker terminals on the TV.
<|>
Place the speakers so the
viewing area is between the TV
and the rear surround speakers.
(See overhead view drawing.)
Turn TV ON and place the
STEREO control to the "STEREO
IF AVAILABLE" (i^) position.
After setup whenever a stereo
signal is received the audio will be
heard in Surround Sound.
I / S
mart
H
elp
Remember, Surround
M Sound will not work with
only one speaker connected; or
with monaural audio material
(unless the Incredible Surround
control is turned ON - see page
24.)
REAR SURROUND SOUND
SPEAKER TERMINALS
BACK OF TV
REAR SURROUND SOUND SPEAKERS
Note: The rear Surround Sound speakers will not
be heard at the same volume level as the front TV
speakers. It is intended for the speakers to give
a background noise effect which requites a lower
volume level than the TV's from speakers.
TV
PRIMARY VIEWING AREA
27