Adjustment items 17" model, English – Compaq P1210 User Manual
Page 19
- 8 -
ENGLISH
Adjustment Items
17" Model
Items
Function
X: Available
A B
C
*Moire is a series of wavy patterns caused by the interference between the aperture grille
of the CRT and the raster generated by the video card. Adjust the level to the minimum
value at which moire is no longer observed.
A. Press "GEOMETRY RESET" to restore to the factory preset level.
B. Press and buttons together, to restore to the factory preset level.
C. Set data does not change by the change of the signal timing.
CONTRAST
Adjusts the contrast level.
X X
BRIGHT
Adjusts the black level of the screen.
X X
COLOR TEMPERATURE Adjusts the color temperature of the image on the screen.
X X
HORIZ-SIZE
Adjusts the horizontal size of the image on the screen.
X
HORIZ-PHASE
Adjusts the horizontal position of the image on the screen.
X
VERT-SIZE
Adjusts the vertical size of the image on the screen.
X
VERT-POSITION
Adjusts the vertical position of the image on the screen.
X
PINCUSHION
Straightens the left and right sides of the image on the screen.
X
KEYSTONE
Adjusts the parallelism of the left and right sides of the image on the screen.
X
TOP-PIN
Adjusts the pincushioning at the top corners of the screen.
X
BOTTOM-PIN
Adjusts the pincushioning at the bottom corners of the screen.
X
PIN-BALANCE
Adjusts the curvature of the left and right sides of the screen image.
X
KEY-BALANCE
Adjusts the vertical slant or tilt of the screen image.
X
ROTATION
Adjusts the rotation of the image.
X
GEOMETRY RESET
Restore to the factory preset level. (Only function on factory preset timing)
-
-
-
*MOIRE CANCEL LEVEL Adjusts the moire level on the screen.
X
CLAMP PULSE POSITION
Use this function to eliminate excessive green or white background that
may occur when external sync signals are applied to the monitor.
VIDEO LEVEL
Selects video level 1.0V or 0.7V. (0.7V Standard)
DEGAUSS
Eliminates possible color shading or impurity.
-
-
-
POWER-SAVE
When setting to ON, the power consumption of the monitor will be reduced
X
when not in use.
CONTROL LOCK
Locks the OSD function to keep the screen you desired.
X
DIAGNOSIS
Indicates the current scanning frequency and factory or user preset
timing number.
-
-
-
LANGUAGE
Selects the language used on OSD screen.
X