Adjustment items 22" model, English, Adjustment items – Compaq P1210 User Manual
Page 13: 22" model
- 2 -
ENGLISH
CONTRAST
Adjusts the contrast level.
X
X
X
BRIGHT
Adjusts the black level of the screen
X
X
X
COLOR NO
Select the desired color from Color 1, Color 2, and Color 3 presets.
X
R-GAIN
Adjusts the red-color balances for the selected color.
X
X
X
G-GAIN
Adjusts the green-color balances for the selected color.
X
X
X
B-GAIN
Adjusts the blue-color balances for the selected color.
X
X
X
COLOR TEMPERATURE
Adjusts the color temperature of the image on the screen.
X
X
X
COLOR RESET
Restores the each color gain and color temperature to the factory preset.
-
-
-
-
HORIZ-SIZE
Adjusts the horizontal size of the image on the screen.
X
X
X
HORIZ-PHASE
Adjusts the horizontal position of the image on the screen.
X
X
X
VERT-SIZE
Adjusts the vertical size of the image on the screen.
X
X
X
VERT-POSITION
Adjusts the vertical position of the image on the screen.
X
X
X
PINCUSHION
Straightens the left and right sides of the image on the screen.
X
X
X
KEYSTONE
Adjusts the parallelism of the left and right sides of the image on the screen.
X
X
X
TOP-PIN
Adjusts the pincushioning at the top corners of the screen.
X
X
X
BOTTOM-PIN
Adjusts the pincushioning at the bottom corners of the screen.
X
X
X
PIN-BALANCE
Adjusts the curvature of the left and right sides of the image on the screen.
X
X
X
KEY-BALANCE
Adjusts the vertical slant or tilt of the screen image.
X
X
X
VERT-LIN-BALANCE
Centers the linearity of the vertical axis of the screen.
X
X
X
VERT-LIN
Adjusts the linearity of the vertical axis of the screen.
X
X
X
ROTATION
Adjusts the rotation of the image on the screen.
X
X
X
ZOOM
Zooms the screen to all sides.
X
X
X
GEOMETRY RESET
Restores to the factory preset level.(See "NOTE" below.)
-
-
-
-
FINE PICTURE MODE
Selects the status which provides the most pleasing image.
X
HORIZ-CONVERGENCE
Adjusts the horizontal alignment of the red, green and blue beams.
X
X
X
VERT-CONVERGENCE
Adjusts the vertical alignment of the red, green and blue beams.
X
X
X
CORNER PURITY (TL)
Adjusts the purity of the top-left corners of the screen.
X
X
X
CORNER PURITY (TR)
Adjusts the purity of the top-right corners of the screen.
X
X
X
CORNER PURITY (BL)
Adjusts the purity of the bottom-left corners of the screen.
X
X
X
CORNER PURITY (BR)
Adjusts the purity of the bottom-right corners of the screen.
X
X
X
MOIRE CANCEL
When setting to ON, the moire level on the screen can decreased by the MOIRE
X
CANCEL LEVEL.
MOIRE CANCEL LEVEL
Adjusts the moire level on the screen.
X
X
CLAMP PULSE POSITION
Uses this function to eliminate excessive green or white background that may occur
X
when both Sync-On-Green and external sync signals are applied to the monitor.
VIDEO LEVEL
Selects video level 1.0V or 0.7V. (0.7V Standard)
X
DEGAUSS
Eliminates possible color shading or impurity.
-
-
-
-
POWER SAVE
When setting to ON, the power consumption of the monitor will be reduced when not in use
X
X
if your computer is set for power management.
CONTROL LOCK
Locks the OSD function except for "BRIGHT" and "CONTRAST".
X
OSD POSITION
Moves the OSD screen position.
X
X
ALL RESET
Restores all items to the factory preset level.(See "NOTE" below.)
-
-
-
-
GTF AUTO ADJUST
Adjusts the screen size and distortion automatically.
-
-
-
-
DIAGNOSIS
Indicates the current scanning frequency, factory or user preset timing number, and -
-
-
-
signal input connector.
LANGUAGE
Selects the language used on OSD screen.
X
Items
Function
A B
C D
A. Press "GEOMETRY RESET" to restore to the factory preset level.
B. Press and buttons together, to restore to the factory preset level.
C. Press "ALL RESET" to restore to the factory preset level.
D. Set data does not change by the change of the signal timing.
Adjustment Items
X:Available
If a non-Factory Preset timing is used, "GEOMETRY RESET" and "ALL RESET" do not work.
22" Model