Compaq P1210 - Manual (Page 18)

- 7 -
ENGLISH
HORIZ-STATIC
VERT-STATIC
MOIRE CANCEL LEVEL
CORNER PURITY(TL)
CORNER PURITY(TR)
CORNER PURITY(BL)
CORNER PURITY(BR)
CLAMP PULSE POSITION
VIDEO LEVEL
DEGAUSS
POWER-SAVE
CONTROL LOCK
OSD POSITION
DIAGNOSIS
LANGUAGE
To select 1.0V of video input. To select 0.7V of video input.
Group
Icon
Press the Minus Button
Item
Item
Icon
Press the Plus Button
To decrease the level of the moire-clear wave.
To adjust the purity condition on the top-left corner.
To eliminate an excessive green or white-back ground that
may occur when external sync signals are applied to the
monitor.
To clamp the video signal at
the front of the H-Sync pulse.
To clamp the video signal at the
back of the H-Sync pulse.
To eliminate possible color shading or impu-
rity due to magnetic effects.
To select the constant power
consumption mode.
To select the power-save mode.
(Your computer must be set for
power management.)
To permit all OSD adjustments.
To lock the OSD function except for
"BRIGHT" and "CONTRAST".
To move the OSD screen position
in a counter clockwise direction. To move the OSD screen
position in a clockwise direction.
Shows the current scanning frequency and Preset No..
To choose the language used on OSD.
ENG......English, FRA......French, ESP......Spanish,
GER......German, JPN......Japanese
To adjust the purity condition on the top-right corner.
To adjust the purity condition on the bottom-left corner.
To adjust the purity condition on the bottom-right corner.
MISC.
VIDEO
To adjust the horizontal beam alignment on the full screen area.
To adjust the vertical beam alignment on the full screen area.
19" Model