SoundMax SM-CMD5001 User Manual
Page 19
19
GOTO button, and the monitor shows FREQ. Then press number buttons to input the ency. The unit will go to the input frequency.
this function is only available when GOTO FREQ is set to ON in System adjustment menu.
RDS background
RDS service availability varies with areas. Please understand if RDS service is not available in you area, the
following service is not available.
RDS touchable user interface
1. During PTY ON, touch this button to search the station
with the selected program type.
2. PTY. Touch it to set PTY function ON or OFF.
3. UP/DOWN arrows. Touch it to select program type.
4.
button. Touch it to set TA function ON/OFF.
5. AF button. Touch it to set AF function ON/OFF.
6. SEEK+/- buttons. Touch to tune automatically.
7. BACK button: Touch to go to Radio interface.
AF (Alternative frequencies) function
Briefly press AF/EQ button on the RC to enable AF function. When the radio signal strength is poor, enabling
the AF function will allow the unit to automatically search another station with the same PI (Program
Identification) as the current station but with stronger signal strength.
Note: AF indicator on the display will flash until RDS information is received. If RDS service is not available
in your area, turn off the AF mode.