SoundMax SM-CMD5001 User Manual
Page 14
14
e control
VOL+/VOL- button on the RC or +/- on the unit to increase/decrease the sound level.
ing the sound characteristics
Repeatedly press SEL button on the RC or MENU/SEL button on the unit to select the desired parameter in
the following order: VOL => BALAN => FADE => BASS => TREBL => SUBWF. After selecting the desired
parameter, you can adjust the current level by pressing VOL+/- buttons on the RC or on the unit.
Mute function
Press MUTE/- button on the RC or MUTE button on the unit to turn off the sound. The corresponding icon
appears on the TFT. Press the button again or adjust volume to resume the sound output.
Equalizer setting
While listening to music of any kind, you can select the corresponding preset modes to adjust the sound
quality perfectly by using AF/EQ button on the RC. Press and hold the button repeatedly to choose the
following modes in turn: POP => CLAS => ROCK => OFF. The default setting is OFF.
Loudness
Press and hold TA/LOUD button on the RC to activate loudness function. This is to increase the low
frequency, which can improve sensitivity for your ears. Keep pressing it again to quit this function.
Mode selection
Repeatedly press PWR/SOURCE button on the RC or PWR/SRC button on the unit to select a mode: Radio
=> DVD => SD Card => TV => AUX => USB. Or in any mode touch SRC item on the screen to display the
Main menu. In the menu, touch the item of the mode you need to select the corresponding mode.
Note: The DVD, SD Card and USB modes are only available when corresponding storages are inserted into
the unit. If a mode in the menu is in cyan font, this mode is not supported by the unit.
Clear
After inputting false data, press CLEAR button to clear it.