Chief Manufacturing Truss Pitch-Adjustable Mount TPP User Manual
Page 2
Instruction Manual
TPP
1
IMPORTANT WARNINGS AND CAUTIONS!
• WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
• CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
•
WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can
support a redundant weight factor five times the total weight of the equipment. If the structural members
can not support this weight, reinforce the structural members before installing the mount.
•
WARNING: The installer is responsible for verifying that the structure to which the TPP is anchored will safely sup-
port the combined load of all attached components or other equipment.
•
WARNING: The weight of the display must not exceed 150 lbs. (68.04 kg), the maximum load capacity of the TPP.
•
WARNING: Be aware during the installation that there are no pinch points for people and for electrical wiring.
•
WARNING: Be aware of the potential for personal injury or damage to the mount if it is not adequately mounted.
•
CAUTION: Check the unit for shipping damage before you begin the installation.
•
CAUTION: Changes or modifications not approved by Chief Manufacturing could void user’s warranty.
TOOLS REQUIRED FOR INSTALLATION
•
Socket set with extension
•
Open wrenches
NOTE: Other tools may be required depending on the
method of installing the lift in the ceiling.
CONTENTS
PARTS ........................................................................
2
INSPECT THE MOUNT BEFORE INSTALLING .......
3
TPP INSTALLATION .................................................
3
Assembly ...................................................................
3
Mount the Display .......................................................
5
Tilt Adjustment ...........................................................
5
Remove the Display ...................................................
6