Hyundai H-CDM8042 - Manual (Page 6)

6
Attaching the control panel
· Place the panel under 45
0 according to the main unit.
· Put the right side of the panel into the unit by entering the
panel of right side and pushing of panel.
· Then place the panel under 45 0 according to the main unit
and push the left side until it clicks.
Caution:
DO NOT insert the control panel from the left side. It can damage the control panel.
The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be careful
not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part. Be careful not
to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton
swab soaked in isopropyl alcohol to clean the socket on the back of the control panel.