Continental Refrigerator Undercounter Refrigerator and Freezer Pizza Preparation Table - Manual (Page 18)

FIGURE 7
EVAPORATOR ASSEMBLY
INTERIOR ACCESSORIES
The standard interior accessory package that is supplied from the factory with your
new sandwich unit model consists of standard pilaster strips with pilaster clips (four
(4)clips per shelf), and one (1) epoxy coated shelf per section.
SHELVING INSTALLATION
Pilaster strips which support the shelving are secured to the cabinet walls with
special pilaster screws which allow the strips to be readily removed for cleaning
without the use of tools. Shelf clips are easily installed by inserting them into the
pilasters at the desired shelf location and shelf installation is as simple as placing
the shelf on the clips as shown in figure 8.
Important Note: When loading shelves with food product, allow space between
rows of product for proper air circulation, and do not load product to block back wall
above step (leave at least 2" of air space between product and back wall above step).
18