JVC KS-F500 - Manual (Page 18)

18
ENGLISH
See
page
Factory-
preset
settings
3
Set.
1 2
Select.
• Press SEL (select) when the setting is complete.
Canceling Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources.
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON:
Advanced SCM (different sound modes for different sources)
• LINK OFF: Conventional SCM (one sound mode for all sources)
1. Press and hold SEL (Select) for more than 2 seconds to call up the general settings mode.
2. Select “SCM LINK” with
¢ or 4 .
3. Select the desired mode with the control dial.
The SCM LINK mode changes as follows:
MUTING 1 OFF
MUTING 2
SSM
LINK OFF LINK ON
CLOCK H Hour adjustment Back Advance
0:00 16
CLOCK M Minute adjustment Back Advance
SCM LINK Sound control memory linkage LINK OFF LINK ON LINK ON below
LEVEL Level display
TEL Audio mute for cellular
OFF 19
phone system
B.SKIP Blank skip OFF ON OFF 11
AUDIO 2
OFF
AUDIO 1
AUDIO 2 19
EN.16-20KS-F500[EE] 00.3.28, 3:28 PM 18