Philips PR1929B - Manual (Page 4)

S etting U p and U sing Y our TV (C ont ’ d )
rC
R emote
T ' 0 load the batteries into the
remote:
I.Slide off the battery
compartment lid on the
remote control.
2. Insert two AA batter­
ies (supplied) into the
battery compartment
as indicated inside the
compartment. Batteries
installed incorrectly may
damage the remote con­
trol.
3. Replace the lid.
Battery
Compartment
Lid
—( begin ;
Battery
Compartment
Point the remote control
toward the remote sensor on the TV
when operating the TV with the remote.
POWER Button ______________________
Press to turn the TV ON and OFF.
MENU Button ____________________
Press to access the on-screen menu. Press to
return to a previous menu or press (repeat­
edly if necessary) to remove the menus.
Press the CH(annel)
A/T buttons to select
an item in the menu. Press the VOL(ume)
►/^ buttons to adjust an item in the menu
or to advance to the next menu.
Number Buttons ____________________
Press to select channels.
• Cable Users
Enter channel numbers as a two-digit num­
ber for the quickest results. For example, to
select channel 6, press 0,6. If you only press
the Number 6 button, channel 6 will be
selected after a brief delay. (There also may
be a brief delay when you select channels 10.
I I, and 12.) If you want to select channels
100 and above, enter channel numbers as a
three-digit number. For example, to select
channel I 17, press 1, 1,7.
• Antenna Users
Enter channel numbers as a two-digit num­
ber for the quickest results.You may only
select channels 2-69. For example, to select
channel 5, press 0,5. If you only press the
Number 5 button, channel 5 will be selected
after a brief delay.
SLEEP Button
Press to set the TV to turn itself OFF automati­
cally. Details are on page 5.
CH(annei) A/T Buttons
Press to scan through programmed channel
numbers. Press to select an item in the on­
screen menu.
VOL(ume) ►/^ Buttons
Press to adjust the TV sound level. Press to
adjust an item in the on-screen menu or to
advance to the next menu.
MUTE Button
Press to turn OFF the sound on the TV. Press
again to return the sound to its previous level.
Mute will be cancelled also if you press the
VOL(ume) ► button to turn up the volume.
STATUS/EXIT Button
Press to see the current channel number on the
TV screen.
Press to remove the on-screen menu.You also
may remove the menu by pressing the
CH(annel)
A/T buttons to select EXIT, then
pressing the VOL(ume) ►/^ buttons.You may
need to select EXIT repeatedly to remove all
the menus. Or, you may press the MENU button
repeatedly to remove all the menus.
ALT, CH (Alternate Channel) Button
Press to return to the TV channel you were
viewing immediately before switching to your
current channel.
CC (Closed Caption) Button
Press to select a Closed Caption mode.
Details are on page 7.
FM Button
Press to select FM radio mode.
Press again to return to TV mode.
T elevision I—tBEGIN>
<2> Press the POWER
button to turn ON the TV.
Be sure to connect the TV
power cord to a standard AC
outlet.
Press the VOLUME
A/T buttons to adjust
the sound level.
Press the CHAN-
NEL A/T buttons to
select available TV chan­
nels.
TV/FM MENU VOLUME CHANNEL POWER
O O EQ33 O
'------ ----------------'
Remote
Sensor
Press the MENU button
to display the TV’s on-screen menu.
Press the CHANNEL A/T but­
tons to select an item in the menu.
Press the VOLUME A/T but­
tons to adjust an item in the
menu or to advance to the next
menu.
Note: To remove the menu, press
the CHANNEL A/T buttons to
select EXIT.Then, press the VOL­
UME A or T button. (You may
need to select EXIT repeatedly to
completely remove all of the
menus.)
Or, press the MENU button,
repeatedly if necessary, to remove
the on-screen menus.
Notes:
• You can connect earphones (not supplied) to the EARPHONE jack on the front of the TV for private, personal listening.
• To listen to FM radio stations, press the TV/FM button on the front of the TV to select FM mode. Details are on page 5.
The current _
channel number
will appear briefly
when the TV is first
turned ON and with
channel changes.To
display the channel
number for five sec­
onds, press the STA­
TUS/EXIT button.
You can turn on the
TV by pressing the
CHANNEL A/T
buttons on the front
of the TV. The
CH(annel)
A/T but­
tons of the remote
control will not turn
on the TV power.
F eatures
C hannel E dit
C HANNEL EDIT makes it
easy for you to add other
channels or drop unwanted
channels from the TV's memory.
-C begin J-
GD CD G3
CD CD CD
CD CD CD
GD G3
Press the MENU but­
ton, then press the
CH(annel)
A/T buttons to
select SETUP.
SmartLock
SmartLock REVIEW ►
1 SETUP ► 1
EXIT ►
BRIGHTNESS llllliii V
■ Press the VOL(ume)
► or ◄ button to continue
to the SETUP menu.
- Press the CH(annel)
A/T buttons to select
CHANNEL EDIT.
'^NGUAGE ENG^X
AUTO INSTALL ► '
1 CHANNEL EDIT ► 1
FM ANTENNA INT
EXIT
<^i Press the VOL(ume)
► or ◄ button to continue
to the CHANNEL EDIT
menu.
CHANNEL will be selected.
EXIT ►
1 CHANNEL 10 1
SKIPPED YES
. While CHANNEL is
selected, press the
VOL(ume) ► or ◄ button
or the Number buttons to
select the channel
you
want to add or skip.
EXIT
1 CHANNEL 18 1
SKIPPED YES
V y
<§> Press the CH(annel)
A/T buttons to select
SKIPPED.
Then, press theVOL(ume)
► or ^ button to set
SKIPPED to YES (if you
want to skip past the channel
when using the CH(annel)
A/T buttons) or NO (if you
want the channel to be avail­
able when you are using the
CH(annel) A/T buttons).
Press the
STATUS/EXIT button
when you are finished.