Philips PR1929B - Manual (Page 2)

H ooking U p Y our TV (A ntenna /C able C onnections )
A ntenna I----- (BEGIN>
C ombination UHF/VHF
A combination antenna
receives normal broadcast
channels (VHF 2-13 and UHF
14-69).Your connection is easy
since there is only one 75Q
(ohm) antenna jack on the
back of your TV - and thafs
where the antenna goes.
if your antenna has a
round connector (750),
then you're ready to connect it
to the TV.
If your antenna has flat
twin-lead wire (3000), you
first need to attach the antenna
wires to the screws on a 300
to 750 adaptor.
Push the round end of
the adaptor (or cable) onto
the ANT(enna) IN jack on
the back of the TV. If the
round end of the adaptor or
cable is threaded, screw it
down tight.
To set the _
TV to select only
the channel numbers
in your area, see
Auto Install on page
3.
Combination
VHF/UHF
Antenna
(Outdoor or
indoor)
Back of TV
-f BEO IN)-
S eparate
UHF/VHF
Y OU may have two separate
antennas. One antenna is for
VHF channels (2-13) and the
other antenna is for UHF chan­
nels (14-69).
For homes with separate
UHF/VHF antennas, you will
need an optional combiner
before you can connect the
antennas to the TV.
- Attach the separate
UHF and VHF antennas to
the correct screws on the
combiner.
<2> Push the round end of the
combiner onto the ANT(enna)
IN jack on the back of the TV. .
Outdoor UHF Antenna
(Twin-lead 300Q)
Outdoor VHF
Antenna
(Twin-lead 300Ì2)
Outdoor VHF Antenna
(Round cable 75Ì2)
To order _
any optional
accessory, contact
your dealer. Or, call
1-800-851-8885 and
refer to the follow­
ing part numbers to
order.
® UHF/VHF
Combiner:
4835 466 97016
® 75-3000
Adaptor:
M6I009
® 300-750
Adaptor:
4835 218 27003