Replacing the cutting unit, Storage – Philips T765-60 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Replacing The Cutting Unit
If vour cutters become damaged or worn,
do not continue using the Trimmer: Replace
cutters immediately.
H
Open the cutting unit.
B Remove the old cutting unit by pulling it
upwards (fig. 13).
B Place the two notches of the new cutting
unit into the guiding slots (fig. 14).
Q Push the cutting unit back onto the Trimmer
until you hear a ‘click’.
This Trimmer has no other user-serviceable
parts. For assistance call I -800-243-3050.
Storage
I Be sure Trimmer is turned off and remove
cord from outlet and Trimmer before storing
in a safe, dry location where it will not be
crushed, banged, or subject to damage.
I Do not wrap cord around Trimmer when
storing.
I Store cord in a safe location where it will not
be cut or damaged.
I Do not place or store Trimmer where it
can fall or be pulled into a tub or sink, water
or other liquid.