Philips T765-60 - Manual (Page 7)

Replacing Guide Comb Attachment
On Trimmer
il Be certain Trimmer is in OFF position.
H Replace Guide Comb Attachment until
it “clicks” into position.The Guide
Comb Attachment can be placed on
Trimmer only one way. If it does not fit
properly, reverse it.
NOTE:The Zoom Lock can be on any setting
when removing or replacing Attachment.
Cleaning
I Always switch Trimmer OFF before cleaning.
►
Do not use abrasives, scourers or liquids such
as alcohol, benzene, bleach or acetone to clean
the Trimmer.
► Never clean, remove or replace Guide
Comb Attachment with motor ON.
I Do not apply pressure to cutters.
►
Do not touch cutters with hard objects as this
may damage them.
I Do not use while bathing, showering or
immerse the Trimmer in water or other liquids
as damage to Trimmer may occur.
During Use:
I If cut hairs have accumulated in the Guide
Comb area, turn Trimmer off, pull Guide Comb
Attachment off Trimmer and remove hairs by
shaking and/or blowing.
Once A Week:
H
Make sure the Trimmer is switched OFF
and disconnected from the electrical outlet.
B Remove the Guide Comb Attachment.
H Open the cutting unit (fig. 10).
Q Clean the cutting unit and the inside of the
Trimmer with the brush supplied (fig. I I).
n Close the cutting unit by pushing it back
into place on the Trimmer until you hear a
click (fig. 12).