OmniSistem Beta 3 – C223 - Manual (Page 7)

2-WAY, 3-WAY CROSSOVERS
C223
INPUT
Connectors:
Type:
Impedance:
Max input level:
CMRR:
OUTPUT
Connectors:
Type:
Impedance:
Max output level:
PERFORMANCE
Bandwidth:
Frequency response:
Signal-to-noise:
Dynamic range:
THD+noise:
Interchannel crosstalk:
CROSSOVER FREQUENCIES:
Stereo mode
low/high:
Mono mode
Low/mid:
Mid/high:
Filter type:
Function switches:
Front panel
Low cut:
Phase invert:
Rear panel
X10"
Mode:
Lf sum:
INDICATORS
Stereo operation:
Mono operation:
Low cut:
X10:
Phase invert:
POWER SUPPLY
Power consumption:
Mains connection:
PHYSICAL
Dimensions:
Weight:
Shipping weight:
Note: specifications subject to change.
XLR
Electronically balanced/unbalanced, RF filtered
Balanced>50k
,unbalanced>25k
+22dBu typical, balanced or unbalanced
>40dB, typically >55dB at 1kHz
XLR
Electronically-balanced/unbalanced, RF filtered
Balanced 200
, unbalanced 30
>+20dBu balanced/unbalanced into 600 Ohm or greater
20Hz to 20kHz, +0/-0.5dB
<3Hz to >90kHz, +0/-3dB
Ref: +4dBu, 22kHz measurement bandwidth
>106dB, unweighted, any output
<0.004% at +4 dBu, 1kHz
<0.04% at +20 dBu, 1kHz
<-80dB, 20Hz to 20kHz
45 to 960Hz or 450Hz to 9.6kHz(x10 setting)
45 to 960Hz or 450Hz to 9.6kHz(x10 setting)
45 to 960Hz or 450Hz to 9.6kHz(x10 setting)
Linkwitz-Riley, 24dB/octave,
Activates 40Hz Butterworth, 12dB/octave High-pass filter, one switch per channel.
Inverts the phase at the output, one switch per output.
Multiplies crossover frequency range by 10, one switch per channel.
Selects stereo/mono and 2/3-way operation.
Selects normal(stereo) or mono-summed low frequency operation.
Green LED
Yellow LED
Red LED per channel
Green LED per channel
Red LED per output(3 peer channel)
220V 10%/50Hz
15WATT
IEC 320 receptacle
483x175x45mm
1.7kg
2.5kg
6