OmniSistem Beta 3 – C223 - Manual (Page 3)

2-WAY, 3-WAY CROSSOVERS
C223
FRONT PANEL
Stereo 2-way mode
In 2-way stereo mode the controls are marked BELOW the horizontal red line.
Channel one and channel two functions are identical in the stereo mode. LEDs are disabled for controls
which are non-functional in this mode.
INPUT GAIN
LOW CUT
LOW/HIGH
X10 LED
LOW OUTPUT
PHASE INVERT
HIGH OUTPUT
PHASE INVERT
STEREO
Controls the INPUT level with +/- 12dB of gain.
Switch for selecting the 40Hz high pass filter. An LED indicates the selection.
Selects crossover point between the LOW and HIGH outputs.
Indicates that the LOW/HIGH crossover frequency range is 450Hz to 9.6kHz.
Controls the Low Frequency output level with a range of to +6dB.
Switch for reversing the polarity on the low output. An LED indicates the selection.
Controls the High Frequency output with a range of to +6dB.
Switch for reversing the polarity on the High Output. An LED indicates the selection.
LED indicating stereo mode operation.
[1]&[5]
[9]&[15]
[2]&[6]
[10]&[16]
[3]&[7]
[11]&[17]
[4]&[8]
[12]&[18]
[14]
9 10 11 12 13 14 15 16 17 18
CHANNEL ONE CHANNEL ONE CHANNEL TWO CHANNEL TWO
INPUT LOW CUT LOW/MID
LOW/HIGH
LOW OUTPUT
HIGH OUTPUT
MONO
STEREO
INPUT LOW CUT LOW OUTPUT
0
+6 -6
+12 -12
dB GAIN dB GAIN
-10
-30 0
240
140
70
350
680
45 960 Hz
XOVER FREQ
0
dB GAIN
-10
-30
+6
Stereo 2-Way/Mono
3-Way Crossover
C 2 2 3
INV 40Hz x10 INV
MID/HIGH
LOW/HIGH
MID OUTPUT
HIGH OUTPUT INPUT LOW CUT LOW OUTPUT
0
+6 -6
+12 -12
dB GAIN dB GAIN
-10
-30 0
+6
240
140
70
350
680
45 960 Hz
XOVER FREQ
0
dB GAIN
-10
-30
+6
INV 40Hz x10 INV
HIGH OUTPUT
2