OmniSistem LED Par 64 (4 Channel) - Manual (Page 6)

LED PAR 64 PRO - 4 CH. Manual 2010-01-01
MAINTENANCE
The amount of maintenance is dependent on atmospheric conditions and frequency of use. A frequent cleaning of the
device is recommended. Please use a soft lint-free damp cloth. never use alcohol or solvents to clean your unit.
DANGER!
Disconnect the power cord from the main power prior to using any liquid to clean your unit.
TROUBLESHOOTING
If your unit does not turn on:
 Check the main power source is fully functional
 Check power cord connection
 Check that the correct fuse has been installed and it is not blown
If the unit is not responding to sound:
 Check that the dip switches at the rear of unit to have been set to sound activation
 Check sensitivity switch at the rear of the unit
There are no user serviceable parts inside this unit, maintenance and service operation are to be carried out by an
authorized dealer or service center only. Repairs attempted by unauthorized personnel voids the manufacturer's
warranty.
WARRANTY
The OmniSistem LED PAR 64 PRO (4 CH.) unit carries a limited warranty against manufacturer's defects. All service items must be
given a RA# prior to shipping to our facilities. You can acquire a RA # by calling our offices during regular business hours. All service
items must be shipped with a copy of original receipt if purchased within a year and covered under our warranty policy. If the unit
has been modified, warranty is void.
If you have purchased an extended warranty through a third party for an OmniSistem product, you must follow protocol for the
extended warranty service you purchased. OmniSistem will not reimburse for services rendered under a third party extended
warranty contract.
For additional information regarding operation of the unit or in the event you have a unit to be sent in for service,
contact the OmniSistem Technical Department at 253-395-9500 Monday – Friday 10am - 4pm PST.