OmniSistem SC 1216 User Manual

Page 10

SC 1216 Plus Manual

2009‐10‐01

DELETING A STEP:

           1) Enable program mode.
           2) Select the chase that contains the step you wish to delete.
           3) Press the TAP/DISPLAY button, the LCD shows the current step.
           4) Press the BANK up/down button and scroll to the step you wish to select.
           5) Press the AUTO/DEL button to delete the step. All LEDs will flash three times indicating the requested operation
                has been performed.

DELETE A CHASE:

           1) Press the button corresponding to the chase you wish to delete.
           2) Press and hold down the AUTO/DEL button while holding down the chase button. All LEDs will flash three times
                indicating the requested operation is complete.

DELETE ALL CHASES:

           1) With the unit removed from all power sources, press and hold down the AUTO/DEL  and BANK  down arrow
                button at the same time.
           2) Return the unit to power sources and power on. All chases should be cleared.