O.S. Engines 21RZ-V01B (P) - Manual (Page 7)

BASIC ENGINE PARTS
SILICONE TUBING AND O-RINGS
Before installing the engine on the chassis:
1.
2.Fit the exhaust seal ring supplied.
The MAX-21RZ-V01b and MAX-21RZ-V01b(P) are
high performance 3.5cc class power units for one-
eighth-scale radio-controlled 'off-road' or 'buggy' cars.
They have been designed to meet the exacting
requirements of the world's most expert drivers. An
exhaustive program of research, development and
prototype testing has resulted in one of the most
powerful production model racing car engines currently
available. The MAX-21RZ-V01b has a conventional
crankshaft, while the MAX-21RZ-V01b(P) employs a
special crankshaft with integral pilot shaft.
NOTE: With this engine, the piston will feel tight at
the top of its stroke when the engine is cold. This
is normal. The piston and cylinder are designed to
achieve a perfect running clearance when they
reach their normal running temperatures.
Connect the intake chamber and the carburetor with
the silicone tubing supplied.
(Note: In the event of the silicone tubing requir-
ing replacement, use tubing of 2.5mm i.d. 5.5mm
o.d. and 85mm in length.)
Heatsink Head
Carburetor
Type 21B
Crankshaft
Crankcase Mounting Lugs
Exhaust
Seal Ring
Intake
Chamber
Silicone
Tubing
As delivered, the engine has its carburetor lightly
fit into its intake. Secure it changing its angle
according to the car chassis.
NOTE
Standard accessories
Glow Plug A5 Super Air Cleaner 201
Exhaust Seal Ring Silicone Tubing
Dust Caps 3, 16, 18
6