O.S. Engines 12TZ(P) - Manual (Page 6)

10
FUEL PUMP
For filling the fuel tank, a simple,
polyethylene "squeeze" bottle,
with a suitable spout, is required.
SILICONE FUEL LINE
Heatproof silicone tubing of
approx. 5mm o.d. and 2mm i.d.
is required for the connection
between the fuel tank and
engine.
7.2V BATTERIES FOR STARTER BOX
Batteries for starter box.
Select according to the
starter box used. Be sure to
full charge before using.
TOOLS
HEX SCREWDRIVER
SCREWDRIVER
Necessary for engine installation.
1.5mm, 2mm, 2.5mm, 3mm
Necessary for carburetor adjustments.
No.1, No.2, etc
LONG SOCKET WRENCH WITH PLUG GRIP
Recommended for easy removal and
replacement of the angled and recessed
glowplug, the O.S.Long Socket Wrench
incorporates a special grip.
SOCKET DRIVER
It is required to tighten and loosen the
carburetor retainer nut. Opposite side distance
of 6mm
11
Outer Head
Crankcase
Mounting Lugs
Exhaust
Cover Plate
Carburetor
Type 11H
Crankshaft
BASIC ENGINE PARTS
Crankshaft Ball Bearing (Front)
MAX- 12TZ(P)-T3