NOYAFA NF-HDMI-II - Manual (Page 12)

Your excellent helper in cable test! 11
Master unit with Remote unit automatic
testing function
※
MAIN (A Type) socket and insert the other one to Remote
unit A Type connector for test HDMI cable A type to A type.
※ Insert A type connector to Master unit LOOPBACK
(A Type) and insert C type connector to Remote unit
Mini-HDMI (C Type) for test HDMI cable A type to
Mini-HDMI (C Type).
※ Insert one of C type connectors of cable to Master
unit Mini-HDMI (C Type) socket and insert the other one
to Remote unite (C Type) socket for test HDMI cable
Mini-HDMI (C Type) to Mini-HDMI (C Type) socket.
1.Slide upper left switch to “REMOTE” then “POWER”
LED lights up. Master unit #1~19 and “Shield” LEDs will
all light up with a long beep sound then Master unit and
Remote unit both #1~19 and “Shield” LEDs will indicate
tested result. Testing result will keep 12 seconds then all
of LED are off except “POWER”LED for saving power.
2.Press “ TEST” button then Master unit and Remote unit
both #1~19 and “Shield” LEDs will indicate tested result.
Testing result will keep 12 seconds then all LEDs are off
except “POWER”LED for saving power.
Insert one of A type connector of cable to Master unit
1.LED indicates test result as below:
Straight Master unit and Remote unit both testing pin
#1~19 and “Shield” LEDs are all lighted up. (Fig 7.)
● :