Product operation methods, Wiring diagram (wiremap) test function, There are four functions to be chosen on main menu – NOYAFA NF-8208 User Manual

Page 8

NetWork

Cable Tester

1.wiremap
2.pair&length
3.coax/tel

4.setup

Product operation methods

Start and display:

Carry out self-checking at the same time (The dotted line dynamically

displays the course of self-checking from left to right):

5 seconds or push any arbitrary key to display main menu.

Main menu display:

Wiring diagram (WIREMAP) test function:

After entering the wiring diagram (WIREMAP) test function, the tester shall

carry out wiring diagram (WIREMAP) test and displays as follows while

checking is being undertaken:

There are four functions to be chosen on main menu.

1. WireMap --- Wiring diagram measurement to check end-to-end con-tinuity

of cables M, L, R and locate error.

2. Pair & Length---Pair and measure length to verify cable length,open circuit

distance, pairing .

3. Coax/Tel---Coaxial cable and telephone line measurement.

4. SETUP---Calibrate

----T e s t i n g ----
12345678...

Your excellent helper in cable test!