beautypg.com

6 ultrasonic sensor installation, 1 bracket assembly – NORAC UC5-BC-RG07 User Manual

Page 13

background image



10

6 Ultrasonic Sensor Installation

6.1 Bracket Assembly

Assemble the breakaway sensor bracket as illustrated in Figure 5, following the instructions
below.

Figure 5: Breakaway Bracket Assembly

1. Compress the spring and insert it together with the collar into the base.

2. Slide the tube through the assembled part.

3. Using the bolt and nut, tighten the collar to the tube with the sensor tube centered.

4. Apply a small amount of grease to the rotating surfaces of the bracket.

This manual is related to the following products: