NORAC UC5-JD09-4B - Manual (Page 7)

4
3.2 List of Parts
The following tables list the John Deere 30 Series main lift kit (JD09) specific parts of the
NORAC UC5 system. This kit is to be used when installing the proportional main lift option
with existing John Deere installations that have a valve block that was purchased after
December of 2010. These valve blocks require a 4-bolt expansion block.
Item Part Number Name Quantity
C10 43230-04 CABLE UC5 VALVE 2PIN DT TO 2PIN DT 2
H01 44863-23 HOSE ASSEMBLY 122R2-06 32 IN L 6FORX 6FORX 1
H10 44865-37 HYDRAULICS FITTING KIT - JD9 1
M01 UC5-JD09-4B-INST MANUAL INSTALLATION UC5 MAIN LIFT OPTION JOHN DEERE (30 SERIES) 1
V01 44962D VALVE ASSEMBLY EXPANSION DPOC PROP DT 4 BOLT 1
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.