NORAC UC5-JD09-4B - Manual (Page 11)

8
5 Electrical Installation
1. Locate the valve module installed on the NORAC valve block.
2. Remove the plugs installed in positions 5 and 6.
3. Connect the 2 pin connector on cable C10 into positions 5 and 6 on the valve module.
4. Connect the other end of cable C10 to the 2 pin connectors on the NORAC expansion
block.
Figure 4: Valve Module Connections
Only the components shown in black are included in this kit.
Output Number Normal Function
1 Left Up
2 Left Down
3 Right Up
4 Right Down
5 Main Up
6 Main Down
7 Option 3
8 Option 4