NORAC UC5-BC-GN02 - Manual (Page 8)

5
4.2 List of Parts
Item Part Number Name Quantity
B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1
B20 44971 SENSOR MOUNTING BRACKET LOW PROFILE 16GA 2
C01 43220-10 CABLE UC5 NETWORK 14 AWG 10M 1
C03 43220-01 CABLE UC5 NETWORK 14 AWG 1M 1
C05 43210-20 CABLE UC5 NETWORK 18 AWG 20M 2
E01 43710 UC5 CONTROLLER MODULE 1
E03 43732 UC5 INPUT MODULE PASS THRU 1
E05 43750 UC5 ULTRASONIC SENSOR 2
E10 43760 UC5 NETWORK COUPLER 3-WAY 1
E20 43764T UC5 NETWORK COUPLER 2-WAY WITH TERMINATOR 2
M02 UC5-BC-GN02-INST MANUAL INSTALLATION UC5 GENERIC UNIT (FIXED GEOMETRY) 1
P02 106602 UC5 NETWORK 12 PIN PLUG (A-KEY) 2
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.