beautypg.com

2 control module: pull type sprayer – NORAC UC5-BC-GN02 User Manual

Page 15

background image



12

7.2 Control Module: Pull Type Sprayer

1. Refer to Figure 2 and Figure 10.

2. Securely mount the control module (E01) near the hitch of the sprayer, using screws, cable

ties or optional brackets, near the display terminal connections.

3. Connect the display terminal to the control module using the display CANbus cable. This

cable must be connected to the end of the control module with only one Deutsch
connector.

4. Connect the power cable to one of the two CANbus connectors on the other end of the

control module.

5. Route cable C01 from the other CANbus connector towards the rear of the sprayer.

Figure 10: Control Module Mounting (Pull Type Sprayer)

See also other documents in the category NORAC Gardening equipment: