NORAC UC5-BC-FC02 - Manual (Page 29)

26
10.2 Valve Assembly: Double Acting
1. On a clean surface remove the plastic plugs from the block.
2. Install the 6MB-6MJ (F06) fittings into the “P” and “T” ports. Tighten to 18 ft-lbs (24 Nm).
3. Insert the two orifices (F07) into the “B” ports with the notch facing out (Figure 25).
4. Install the 6MB-6MJ (F06) fittings into the “B” ports. Tighten to 18 ft-lbs (24 Nm).
5. Insert the two orifices (F07) into the “A” ports with the notch facing in (Figure 25).
6. Install the 6MB-6MJ (F06) fittings into the “A” ports. Tighten to 18 ft-lbs (24 Nm).
Figure 25: NORAC Valve Block Details