NORAC UC4+BC+SM2 - Manual (Page 22)

19
Figure 21: Cable Configurations: C11, C14 and C10
2. Connect the 16-pin AMP plug on the
power cable (C10) to the UC4+
Control Panel (E01) in the sprayer cab.
3. Connect the Amp power cable (C14)
to the 3 pin AMP power cable on C10.
Cable C14 can be connected in line
with the Summers’ control box/joystick
power connection in the tractor cab
(Figure 21).
4. Route the longest connector on cable
C10 to the tractor hitch.
5. Connect the 16 pin AMP connector on
cable C11 to the 16 pin AMP connector
on C10 at the sprayer hitch.