NORAC UC4.5-BC-TA1 - Manual (Page 11)

8
3.7 Alternate Cabling
Some Top Air sprayers may require different cabling depending on the connectors used near
the valve block. Please refer to the table below for ordering alternate cabling from NORAC. A
complete list of alternate cabling can be found in the UC4.5 Generic Cable Ordering Guide
(P/N: UC4.5-BC-CABLE-GUIDE) which is available at www.norac.ca.
Item Part Number Name Connector Picture
C12 44658-97*
CABLE INTERFACE UC4 C12 DT06-2X
GND2 - DIODE
Deutsch DT
C13 44658-74*
CABLE UC4 INTERFACE DEUTSCH
BYPASS
Deutsch DT
C12 44658-38 CABLE UC4 INTERFACE DIN ALL DIN
C13 44658-39 CABLE INTERFACE UC4 DIN DIN
* Supplied with kit.
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.