beautypg.com

NORAC UC4.5-BC-SM2 User Manual

Page 18

background image



15

Figure 16: Bypass/Jam Valve Location

9. Connect the valve interface cable (C03) to connector S6 on (C10).

10. Connect the 2-pin connectors on the valve interface cable to the NORAC valve block, as

shown in Figure 17.

11. The connectors on the valve cable (C03) are marked RIGHT UP, LEFT UP, RIGHT

DOWN and LEFT DOWN. Cables labeled with UP go on the same side as the
hydraulic hoses.

Figure 17: Valve Cable Connections

Bypass/Jam

Valve