NORAC UC4.5-BC-RA2 - Manual (Page 7)

4
3.2 List of Parts
Item Part Number Name Quantity
B01 101375 BOLT CARRIAGE SS 3/8X5 8
B10 44728 MOUNTING BRACKET COMPLETE UC4 BREAKAWAY EXTENDED 2
C05 43210-20 CABLE UC5 NETWORK 18 AWG 20M 2
C10 44650-51 CABLE UC4.5 POWER GENERIC PULL-TYPE 1
C11 44651-50 CABLE UC4.5 EXTENSION VALVE GENERIC 1
C12 44696 RAU VALVE DRIVER 1
C17 44658-58 CABLE UC4 INTERFACE RAU I/O 1 1
C18 44658-59 CABLE UC4 INTERFACE RAU I/O 2 1
C30 43250-06 CABLE UC5 BATTERY PIGTAIL FUSED 1
E01 45100 UC4.5 BOOM CONTROL PANEL 1
E03 43742 UC5 ROLL SENSOR W TEMPERATURE PROBE 1
E04 43741 UC5 ROLL SENSOR VER. 2 1
E05 43750 UC5 ULTRASONIC SENSOR 2
E10 43760 UC5 NETWORK COUPLER 3-WAY 1
E12 43764 UC5 NETWORK COUPLER 2-WAY 1
E20 43764T UC5 NETWORK COUPLER 2-WAY WITH TERMINATOR 2
M01
UC4.5-BC-MANUAL-
OPERATOR
OPERATOR MANUAL UC4.5 SPRAY HEIGHT CONTROL 1
M02 UC4.5-BC-RA2-INST MANUAL INSTALLATION UC4.5 KVERNELAND FIXED GEOMETRY 1
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.