NORAC UC4.5-BC-HD9 - Manual (Page 7)

4
3.2 List of Parts
Item Part Number Name Quantity
B05 44706-01 KIT CABLE TIE BLACK 10 PCS 21 IN 150 PCS 7.5 IN 1
B20 44971 SENSOR MOUNTING BRACKET LOW PROFILE 16GA 2
C05 43210-15 CABLE UC5 NETWORK 18 AWG 15M 2
C10 44650-51 CABLE UC4.5 POWER GENERIC PULL-TYPE 1
C11 44651-50 CABLE UC4.5 EXTENSION VALVE GENERIC 1
C13 44658-60 CABLE UC4 INTERFACE BYPASS AMP SUPERSEAL 1
C17 44658-101 CABLE UC4.5 INTERFACE EAGLE DEMO 1
C30 43250-06 CABLE UC5 BATTERY PIGTAIL FUSED 1
E01 45100 UC4.5 BOOM CONTROL PANEL 1
E04 43741 UC5 ROLL SENSOR VER. 2 2
E05 43750 UC5 ULTRASONIC SENSOR 2
E11 43765 UC5 NETWORK COUPLER 8-WAY 1
E12 43764 UC5 NETWORK COUPLER 2-WAY 1
E20 43764T UC5 NETWORK COUPLER 2-WAY WITH TERMINATOR 2
M01
UC4.5-BC-MANUAL-
OPERATOR
OPERATOR MANUAL UC4.5 SPRAY HEIGHT CONTROL 1
M02 UC4.5-BC-HD9-INST MANUAL INSTALLATION UC4.5 HARDI ECONOMY 1
M07 106676 FUSE AUTOMOTIVE BLADE 10A 1
M10 102084 TOOL PIN REMOVAL G.P. WITH NORAC LOGO 1
P03 105882 UC5 NETWORK 6 PIN PLUG 3
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.