NORAC UC4.5-BC-HD5 Part 1 - Manual (Page 8)

5
3.3 Hardi Supplied Parts
The required HARDI parts necessary for the installation are listed in Table 1.
Table 1: HARDI Parts
Item Part Number Name Quantity
HARDI04 262126 LIQUIDTIGHT CONNECTOR 1
HARDI05 262107 LIQUIDTIGHT CONNECTOR NUT 1
HARDI06 284846 CABLE TIES 175
Item HARDI04 and HARDI05 are only required when using the 44658-51
(C12A) interface harness.
Table 2: HARDI Parts for Aluminum (Round) Booms
Item Part Number Name Quantity
HARDI07 ------ ROUND TUBE CLAMPS FOR MOUNTING TO ALUMINUM BOOMS 4
Items numbers followed with an asterisks are to be delivered to the sprayer
End-User. These parts require installation to the tractor unit in accordance to
the accompanied documentation.
Do not use high speed power tools/drills when installing hardware.
The use of dielectric grease is not recommended on any NORAC electrical
connections.
To ensure all stainless steel hardware does not gall or seize apply a light coating of
the supplied Permatex Anti-seize grease to all threaded parts upon installation.
Permatex Anti-seize lubricant is preferred, but other similar anti-seize products
may be used.