NORAC UC4.5-BC-HD5 Part 1 - Manual (Page 17)

14
6 Electrical Installation
Ensure the UC4.5 Control Panel is OFF for the remainder of the installation
(Bottom of switch pressed IN). Use caution when handling the 12 V power line
of the sprayer wiring.
Depending on the electronics used on the sprayer (DAH or DAH09), either the
NORAC part 44658-51 or 44658-78 will be required for this installation. For
installations using 44658-51, proceed to section 6.1. For installations using the
44658-78 proceed to section 6.2.
Figure 13: HARDI DAH on left (use 44658-51) vs. DAH09 interface on right (use 44658-78)