National Cart SR-101 WRAPPING STATION - Manual (Page 2)

2
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
When using electrical appliances, basic safety should always be followed including:
1. Read all instructions before operating, cleaning or servicing this wrapping station.
2. To protect against risk of electrical shock, do not place cord, plug or base in water
or other liquids or use outdoors.
3. Close supervision is necessary when any appliance is used near children.
4. The wrapping station must be placed on a steady table.
5. Unplug the wrapping station when not in use and before cleaning or servicing.
6. Avoid contact with moving parts.
7. Do not operate wrapping station if it has malfunctioned or has been dropped or
damaged. Call our toll-free customer support service number for information on
examination of faulty unit, repair or adjustment.
8. Do not operate wrapping station if power cord or plug shows evidence of damage.
9. Do not operate if Hot Plate or Cut off bar temperatures exceed 340°f, or if smoke
is detected.
10. Be aware of power cord location. Do not let cord rest on or touch hot surfaces. Do
not allow cord to hang freely over table or counter.
11. Keep body parts and clothing away from heating elements.
12. Do not touch or operate switches or cords with wet hands.
13. Do not place or store combustibles on or near the wrapping station.
14. Insure that the plug has good ground connection.
15. When unplugging wrapping station, pull on the plug. Do not pull on the cord.
16. This wrapping station was designed for commercial use only.
CAUTION:
- Hot Surfaces- Avoid Contact
- To provide continued protection against electric shock, connect only to properly
grounded outlets.
- Do not attempt to repair or replace any parts other than the replacement parts
listed in these instructions. Improper repair or replacement may result in electrical
hazards.