Mytek Digital Stereo 192 Sample Rate Converter (ver. 1.2 / May 2011) - Manual (Page 7)

Mytek Stereo 192 Sample Rate Converter – User Manual
Back Panel
A – IEC Power socket
B – Wordclock BNC Input
C – Wordclock BNC Output
D – AES/EBU XLR Input
E – S/PDIF Coax Input
F – S/PDIF Optical Input (Toslink)
G – AES/EBU XLR Output
H – S/PDIF Coax Output
Functions
IN – You can select the active input by pressing this button.
The status LED will have a solid glow when there is a valid
incoming signal and it's frequency will be displayed when you
have F-IN selected as the F-DISP. If no signal is present the
LED will be blinking and “no In” will be displayed.
F-DISP – This selects whether the input or output frequency is
shown on the display.
SEL and UP – These buttons allow you to cycle through the
various menu options, frequencies, and make selections.
MODE – This chooses whether you want the SRC to function
synchronously, asynchronously with internal crystal as the
clock source or asynchronously with external wordclock as the
clock source.
OUTPUT WORD LENGTH – This chooses between 24, 20,
and 16 bits as the word length.
www.mytekdigital.com Page: 7/12
110/220VAC
SWITCH AND FUSE INSIDE
WCK
IN
WCK
OUT
DESIGNED IN USA
AES IN
SPDIF
IN TOSLINK IN
AES OUT
SPDIF
OUT
A
C
B
G
E H
F
D
WWW.MYTEKDIGITAL.COM