Compaq CP-2E - Manual (Page 67)

5–20 iPAQ Connection Point CP-2E User Guide
Advanced Setup Icons
2. Click Add. The Add BOOTP IP page is displayed.
3. Type the IP address that you wish to assign to the specified MAC
address into the IP Address field. The IP Address you specify must
be within the pool of valid IPs available to the integrated DHCP
Server.
4. Type the MAC address of the PC to which you wish to assign the
specified IP address into the MAC Address field. Refer to Appendix
B for a complete discussion of identifying MAC addresses.
5. If you wish, you can type a brief description into the Comment field.
6. Click Apply. The Connection Point CP-2E must be rebooted for
applied changes to take effect.
7. Click OK. You can reboot the Connection Point CP-2E at any time by
clicking the Reboot button at the left.