beautypg.com

Milwaukee Tool 2265-20NST User Manual

Page 3

background image

4

5

At 5' away, spot is 6" in diameter

At 3' away, spot is 3.6" in diameter

At 1' away, spot is 1½" in diameter

ACCESSORIES

For a complete listing of accessories refer to your
MILWAUKEE

Electric Tool catalog or go online to

www.milwaukeetool.com. To obtain a catalog, con-

tact your local distributor or a service center.

WARNING

Always remove batteries

before changing or removing accessories.
Only use accessories specifi cally recommend-
ed for this tool. Others may be hazardous.

MAINTENANCE

WARNING

To reduce the risk of per-

sonal injury and damage, never immerse
your tool in liquid or allow a liquid to fl ow
inside it.

WARNING

To reduce the risk of injury,

always remove the batteries from the tool
before performing any maintenance. Never
disassemble the tool. Contact a MILWAUKEE

service facility for ALL repairs.

Cleaning

Clean dust and debris from tool. Keep tool handles

clean, dry and free of oil or grease. Use only mild

soap and a damp cloth to clean the tool since certain

cleaning agents and solvents are harmful to plastics

and other insulated parts. Some of these include

gasoline, turpentine, lacquer thinner, paint thinner,

chlorinated cleaning solvents, ammonia and house-

hold detergents containing ammonia. Never use

fl ammable or combustible solvents around tools.

Repairs

For repairs, return the tool to the nearest service

center listed on the back cover of this operator's

manual.

Maintaining Tool

Keep your tool in good repair by adopting a regular

maintenance program. After six months to one year,

depending on use, return the tool to a MILWAUKEE

service facility for repairs.

If the tool does not start or operate at full power

with new batteries, clean the contacts on the bat-

tery door. If the tool still does not work properly,

return the tool to a MILWAUKEE service facility

for repairs.

Cleaning the Lens

Blow off loose particles with clean compressed

air. Carefully wipe the suface with a cotton swab

moistened with water.

Temperature Alarm

Press the Alarm button to turn on the alarm func-

tion. The bell icon is displayed. If the temperature

reading is outside the preset range, the temperature

reading will fl ash and an alarm will sound.

Muting Alarm

Mute the alarm by pressing the

Alarm button. The bell icon will go

off. The temperature reading will

continue to fl ash as long as it is

outside the preset range.

Setting Preset Range for the Alarm

1. To set the alarm range, pull and

hold the trigger and then press the

Alarm button. Repeat to toggle

between LO and HI settings.

2. Pull the trigger to increase the

values, press the Alarm button

to decrease the values. Wait 3

seconds for the ranges to save

and exit.

Low Battery

When the Low Battery icon is dis-
played, change the batteries.

MILWAUKEE

Test & Measurement Products (includ-

ing bare tool, li-ion battery pack(s) and battery char-

ger but excluding alkaline batteries) are warranted

to the original purchaser only to be free from defects

in material and workmanship. Subject to certain

exceptions, MILWAUKEE will repair or replace any

part on this product which, after examination, is deter-

mined by MILWAUKEE to be defective in material or

workmanship for a period of fi ve (5) years* after the

date of purchase. Return the Test & Measurement

tool and a copy of proof of purchase to the nearest

Milwaukee Electric Tool Corporation - factory Service

Center. This warranty does not apply to damage that
MILWAUKEE

determines to be from repairs made or

attempted by anyone other than MILWAUKEE autho-

rized personnel, misuse, alterations, abuse, normal

wear and tear, lack of maintenance, or accidents.
*The warranty period for the LITHIUM-ION battery

pack that ships with the Test & Measurement tool is

two (2) years from the date of purchase. *Alkaline

battery that ships with Test & Measurement tool is

separately warranted by the battery manufacturer.

*The warranty period for a NON-CONTACT VOLT-

AGE DETECTOR – 2201 20 is one (1) year from the

date of purchase.
Warranty Registration is not necessary to obtain the

applicable warranty on MILWAUKEE product. The

manufacturing date of the product will be used to de-

termine the warranty period if no proof of purchase is

provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACE-

MENT REMEDIES DESCRIBED HEREIN IS A CONDITION

OF THE CONTRACT FOR THE PURCHASE OF EVERY

MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS

CONDITION, YOU SHOULD NOT PURCHASE THE PROD-

UCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR

ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNI-

TIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES,

EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A

CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR

DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED

TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES

DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO

YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL

OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO

THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITA-

TION ANY IMPLIED WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO

THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY

LAW, SUCH IMPLIED WARRANTIES ARE LIMITED TO THE

DURATION OF THE APPLICABLE EXPRESS WARRANTY AS

DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMI-

TATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,

SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM

STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada

only.

TECHTRONIC INDUSTRIES' warranty is for 5 year since the

original purchase date.

This warranty card covers any defect in material and work-

manship on this Power Tool.

To make this warranty valid, present this warranty card,

sealed/stamped by the distributor or store where you pur-

chased the product, to the Authorized Service Center (ASC).

Or, if this card has not been sealed/stamped, present the

original proof of purchase to the ASC.

Call toll-free 1 800 832 1949 to fi nd the nearest ASC, for ser-

vice, parts, accessories or components.

Procedure to make this warranty valid

Take the product to the ASC, along with the warranty card

sealed/stamped by the distributor or store where you pur-

chased the product, and there any faulty piece or component

will be replaced without cost for you. We will cover all freight

costs relative with this warranty process.

Exceptions

This warranty is not valid in the following situations:

a) When the product is used in a different manners from the

end-user guide or instruction manual.

b) When the conditions of use are not normal.

c) When the product was modifi ed or repaired by people not

authorized by TECHTRONIC INDUSTRIES.

Note: If cord set is damaged, it should be replaced by an

Authorized Service Center to avoid electric risks.

SERVICE AND ATTENTION CENTER

Rafael Buelna No.1.

Col. Tezozomoc Mexico, Azcapotzalco D.F.

Ph. 01 800 832 1949

IMPORTED AND COMMERCIALIZED BY:

TECHTRONIC INDUSTRIES MEXICO, .S.A.

DE C.V.

Av. Santa Fe 481 piso 6, Col. Curz Manca.

CP 05349, Cuajimalpa, D.F.

LIMITED WARRANTY - MEXICO,

CENTRAL AMERICA AND CARIBBEAN

Model:

Date of Purchase:

Distributor or Store Stamp:

LIMITED WARRANTY -

USA AND CANADA

Distance to Spot 10:1

—— Center of Spot
– – – Laser pointer (approx. 3/4" above center of spot)
Spot size at distance indicated

This manual is related to the following products: