Compaq 230934-002 - Manual (Page 139)

Command Line Interface
C-32 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
Example:
Figure C-36: Topology command
Traps
This command displays and modifies the trap entries. The specifies
the trap IP address and trap port address. The format for is
ip.ip.ip.port
.8 trap entries are supported. Valid range for ‘ip’ is 0 – 255.
Valid range for ‘port’ is 1-2147483647, normally 162.
Syntax
Traps
Traps Add
Traps Delete
Traps Filter
Traps State