Compaq 230934-002 - Manual (Page 137)

Command Line Interface
C-30 Modular SAN Array Fabric Switch 6 User Guide
COMPAQ CONFIDENTIAL
Writer: Kim L. Miller File Name: h-appc Command Line Interface.doc
Codename: Millebourne Part Number: 230934-002 Last Saved On: 8/7/02 9:39 AM
TftpDl Reset = <reset_state> — This setting determines if the switch will
automatically reboot after download.
Variables Description
reset_state
yes Sets switch to automaticly reboot after a new boot image has been
down loaded to it.
no Sets switch tonot automaticly reboot after a new boot image has been
downloaded to it.
TftpDl ChangePrimary — Sets the backup image as the primary image.
TftpDl Start — Starts the download process using the variables configured.
Examples:
Figure C-35: TftpDl command