Milwaukee Tool 6577-20 - Manual (Page 6)

6
funcTional descripTion
Double Insulated Amps
Volts
No Load Revolutions Per Minute
(RPM)
Alternating Current
Underwriters Laboratories, Inc.,
United States and Canada
Cat. No.
Blade
Size
Volts AC No Load
RPM
Arbor
Max Cutting
Depth at 90˚
Max Cutting
Depth at 51.5˚
6477-20
6577-20 7-1/4"
7-1/4" 120
120 4400
4400 Diamond
Diamond 0 to 2-3/8"
0 to 2-3/8" 0 to 1-1/2"
0 to 1-1/2"
specificaTions
symbology
assembly
Selecting Blade
Select a blade appropriate for your application.
Refer to the “Accessories” section for a list of blades
to be used for the proper applications of this tool.
Always use sharp blades. Dull blades tend to
overload the tool and increase the chance of KICK-
BACK. Only use thin kerf blades with a maximum
safe operating speed greater than the no load RPM
marked on the tool's nameplate. Read the blade
manufacturer's instructions before use. Do not use
any type of abrasive cut-off wheel or dry diamond
cutting blades. Use the correct blade type for your
Warning
To reduce the risk of in-
jury, always unplug tool before changing or
removing accessories. Only use accessories
specifically recommended for this tool. Others
may be hazardous.
Warning
Only use accessories with
maximum speed rating at least as high as
nameplate RPM of tool.
18
17
19
21
15
3
14
1
4
5
2
8
12
16
20
6
7
9 10
11
13
1. Oil plug
2. Top handle
3. Motor housing
4. Trigger switch
5. Depth adjusting lever
6. Lower guard lever
7. Blade bolt
8. Lower guard
9. Spindle washer
10. Rip fence slot
11. Sighting notches
12. Shoe
13. Miter adjusting lever
14. Miter scale
15. Spindle lock button
16. Upper guard
17. Oil level window
18. Rafter hook
19. 51.5˚ Override button
20. Depth of cut scale
21. Wrench storage
C US