Vertical Communications DSU II - Manual (Page 46)

Automatic Set Relocation
If your installer has equipped your system with automatic set relocation, when you
move your telephone to a new location, the system will give you a choice (through a
display prompt) as to whether you want to keep your previous programming or use
the programming in the new location.
· To maintain the extension number and programming
features from the old location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND PRESS
HOLD while
the light is still flashing (your telephone immediately assumed the
features from the previous location).
NOTE: If you do not select a button after installing the telephone, the system
will automatically default to the programming from the previous location.
· To assume the extension number and programming
features from the new location,
1. CONNECT the telephone line cord to the new jack.
2. OBSERVE the flashing HOLD light AND DIAL
#
while the
light is still flashing (your telephone immediately assumes the
features from the new location).
40 Single Line Proprietary Telephone Station User’s Guide
Other Advanced Features GCA70-246