Vertical Communications DSU II - Manual (Page 30)

Call Parking
You can place a call on hold in the system so that it can be answered from any station
that does not have a line appearance for the call. You accomplish this by placing the
call in one of nine park orbits, where the call remains until it is answered.
· To place a call on hold within the system where it can be
answered at any telephone in the system (parking a call in
orbit),
1. While on the call, PRESS
INTERCOM AND DIAL
*
.
2. DIAL code for park location (orbit) (
91
to
99
for orbit
1–9).
3. REMEMBER the code for later use OR MAKE IT KNOWN to
those who need to know in order to retrieve the call.
· To retrieve a call that was placed on hold in the system
(parked),
1. From any station, PRESS
INTERCOM AND DIAL
#
.
2. DIAL code for orbit 1–9 (
91
to
99
).
Handling Park Recalls
When a parked call times out of the system, it will return to your telephone in the
form of a park recall (you will hear four short tone bursts at 12-second intervals).
· To answer a park recall,
1. LIFT handset. The call will then connect to your station.
· To place a park recall on hold at your station,
1. LIFT handset. The call will then connect to your station.
2. PRESS
HOLD. If the call remains on hold for a period of time, it
will ring back to your telephone as a hold recall.
24 Single Line Proprietary Telephone Station User’s Guide
Advanced Call Handling GCA70-246