Selecting when program ming automatic dialing, 32 – Vertical Communications DSU II User Manual
Page 38
4. SELECT line button to dial out on or press
INTERCOM.
5. DIAL any number up to 16 digits long (include
*
and
#
if
needed).
NOTE: You may need a pause between numbers to compensate for differences
in response time between your system and the host system (ask your atten-
dant about this). To store a pause, press
HOLD , then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press
TAP to store a hookflash, then continue dialing. Also, you may
need to erase the typed digits appearing in your display to correct them. If
you do, select BKSP once for each digit to be removed.
6. PRESS
TRNS/CONF to store number.
7. PRESS next location button AND STORE next number.
8. REPEAT previous step until all numbers are stored, OR HANG
UP to end.
As you program numbers, fill in the identification strips on your telephone as well as
these tables.
Personal Speed Dial Numbers
(Keypad Buttons)
1
6
2
7
3
8
4
9
5
0
32
Single Line Proprietary Telephone Station User’s Guide
Programming
GCA70-246