Vertical Communications GCA70-248 - Manual (Page 50)

LCD Message Delivery
You can set system-supplied messages to be received or displayed by a calling LCD
speakerphone.
· To turn message on,
1. PRESS
INTERCOM.
2. DIAL
*02
.
3. DIAL the desired number from your message list. The default
messages of “Back At” and “Call” may be used:
• For default message 1, which is “Back At,” dial time in
twelve-hour format using the # as a colon.
• For default message 2, which is “Call,” dial the telephone
number of where you will be.
4. PRESS
SPEAKER to end message. Intercom light flashes steadily.
· To turn off message and your intercom light,
1. PRESS
INTERCOM.
2. DIAL
#02
.
LCD Message List
(Write attendant supplied messages here.)
Dial Code Message
0
1 Back At
2 Call
3
4
42 Non-LCD Speakerphone Station User’s Guide
Nonverbal Messaging GCA70-248