Vertical Communications GCA70-248 - Manual (Page 23)

Do Not Disturb Condition
The Do Not Disturb feature keeps calls from ringing at your station and makes your
station appear to be busy to intercom calls.
NOTE: For instructions on programming a dedicated DO NOT DISTURB
button at your station, see the Feature Buttons section of page 49.
· To enable DND, choose one of the following:
1. PRESS programmed DO NOT DISTURB button. The light next
to the DO NOT DISTURB button turns on when the feature is
active,
2. PRESS
INTERCOM AND DIAL
#01
.
· To override a do not disturb condition at another telephone,
1. MAKE intercom call AND HEAR Do Not Disturb tone.
2. DIAL
*03
(called party will hear several short tone
bursts).
3. WAIT for reply.
· To disable DND,
1. PRESS programmed DO NOT DISTURB button. The light asso-
ciated with the DO NOT DISTURB button turns off when the
feature is disabled,
2. PRESS
INTERCOM AND DIAL
#01
.
Non-LCD Speakerphone Station User’s Guide 15
GCA70-248 Answering Calls