Millennia TCL-2 Twin Topology Stereo Compressor / Limiter - Manual (Page 9)

TCL-2
TCL-2 GENERAL SPECIFICATIONS
THD + Noise, 20 Hz - 30 kHz
Frequency Response -3 dB (SS)
Frequency Response -3 dB (VT) Maximum
Input Level
Maximum Output Level
Input Impedance
Output Impedance (SS)
Output Impedance (VT)
Recommended Load (important)
Noise (20 Hz - 22 kHz)
Common Mode Rejection Ratio
XLR Polarity
DYNAMICS PARAMETERS
Threshold Range
Attack Range
Release Range
Compression Ratio Range
Dynamics Bypass on Each Channel?
Meter Gain Reduction -or- VU Switch?
Stereo Link Switch?
Twin Topology Selection Switch
< .01%, typ .002 %
Sub 2 Hz to beyond 100 kHz
Sub 2 Hz to beyond 100 kHz
+30 dBu (VT or SS)
> +32 dBu (VT or SS)
25,000 ohms (VT or SS)
< 5 ohms
< 300 ohms
> 300 ohms (SS), > 3,000 ohms (VT)
-87 dBu (SS), -82 dBu (VT)
> 50 dB, > 75 dB typical, lOOmV to 20 kHz
Pin 2 positive polarity. Pin 1 = ground
-20 dBu to +20 dBu, continuously adjustable
2 mS to 100 mS, continuously adjustable
00 mS to 3.0 sec, continuously adjustable
Min: 1.4 to 1, Max: 30 to 1, continuous
Yes
Yes
Yes
Switch In = FET Amplifiers
Switch Out = Vacuum Tube Amplifiers
ELECTRO-MECHANICAL SPECIFICATIONS
Power Consumption
Power Requirements
Fuses (2 required)
Internal DC Power
Dimensions
Net Weight
55 Watts, nominal
100VAC to 240VAC, 50/60Hz, selectable
2 ea 1A with 100-120VAC mains (5x20mm,
slow-blow, 250V)
2 ea 500mA with 200-240V mains (5x20mm,
slow-blow, 250V)
+350V+28V -28V +12V
19"Wx12.5”Dx3.5”H
25 pounds
Millennia Media reserves the right to change specifications, delivery, and pricing without notice.