MF Digital ScribeEC 3000 Series - Manual (Page 3)

Aligning the Printer
1. Selecting the Printer
To select the appropriate printer, do the following:
At the “Select Copy or Compare, press the “2” key
From the Options Screen, press the “5” to select the printer
Choose the printer you installed. The system will reboot.
2. Aligning the Printer
• After reboot, the main operating screen displays below:
• Press the “4” key. You will be prompted to “Start Loader Test
Mode?” Press “Stop/No” to bypass “Loader Test Mode”
• You will then be prompted to enter the “Printer Alignment”
feature, as depicted below:
• Press the “Start/Yes” key to enter the “Printer Alignment”
feature.
• Place a CD in the input area and press the “Start/Yes” key.
• The automated arm will pick a disc up from the input area and
place the CD so that it stops just above the printer tray. Check the
alignment of printer and adjust accordingly. After the disc has
been placed you will see the following screen:
• Press the “Start/Yes” key. The disc will be unloaded from the
printer tray. Repeat the process if further alignment is required.
www.mfdigital.com